HPLD-1500
High power constant current laser driver
- Wide input voltage range up to 48 VDC
- Output current up to 38 A
- Compliance voltage up to 40 V
- Efficiency up to 97 %
- Low current ripple
- Triggering up to 3 kHz
- Analog modulation up to 30 kHz
- Overcurrent protection
- Reverse current protection
- Crowbar circuit protection
- External interlock function
- CAN interface
- Integrated heatsink
- Compact size 70 × 56 × 34 mm
HPreTC-10
High precision TEC controller
- Wide input voltage range up to 5 VDC
- Output current up to 5 A
- Compliance voltage up to 2 V
- Efficiency up to 97 %
- CAN interface
- Compact size 50 × 60 × 14 mm
HPTC-100
High power TEC controller
- Wide input voltage range up to 48 VDC
- Output current up to 5 A
- Compliance voltage up to 20 V
- Efficiency up to 97 %
- CAN interface
- Compact size 70 × 56 × 14 mm
PLD-PS-SYNC
Short pulse laser diode driver
- Special Design for 10/14 pin Butterfly Laser Diode
- Output current up to 2000 mA
- Compliance voltage up to 3 V
- Extra short 50 ps pulse width
- Repetition rate up to 30 MHz
- External trigger option
- External clock option
- Master/slave operation mode with the repetition rate jitter suppression
- USB, RS-232, CAN, UART interfaces
- On-Board TEC Controller
- 5Vdc Input Power
- Completed by Heatsink
- Compact Size 85 mm ×60 mm ×21 mm
PLD-NS-SYNC
Short pulse laser diode driver
- Special Design for 10/14 pin Butterfly Laser Diode
- Output current up to 2000 mA
- Compliance voltage up to 3 V
- Adjustable pulse width 1–100 ns
- Repetition rate up to 10 MHz
- External trigger option
- External clock option
- Master/slave operation mode with the repetition rate jitter suppression
- USB, RS-232, CAN, UART interfaces
- On-Board TEC Controller
- 5Vdc Input Power
- Completed by Heatsink
- Compact Size 85 mm ×60 mm ×21 mm
PLD-PS
Short pulse laser diode driver
- Special design for 10/14 pin Butterfly laser diode
- Output current up to 2000 mA
- Compliance voltage up to 3V
- Extra short 50 ps pulse width
- Repetition rate up to 30 MHz
- External trigger option
- On-board TEC controller
- LabVIEW and Python interfaces
- 5 VDC input power
- RS232/USB/CAN/UART interfaces
- Integrated heatsink
- Compact size 85×60×21 mm
PLD-NS
Short pulse laser diode driver
- Special design for 10/14 pin butterfly laser diode
- Output current up to 2000 mA
- Compliance voltage up to 3V
- Adjustable pulse width 1–100 ns
- Repetition rate up to 10 MHz
- External trigger option
- On-board TEC controller
- LabVIEW and Python libraries
- 5 VDC input power
- RS232/USB/CAN/UART interfaces
- Integrated heatsink
- Compact size 85×60×21 mm
PLD-CW-2000/PLD-CW-2000-ZIF
Constant current laser diode driver
- Unified design for 10/14 pin Butterfly Type I Laser Diode
- Constant Current Mode
- Output Current up to 2000 mA
- Compliance voltage up to 3 V
- Low current ripple
- High current stability
- Computer Interface USB, RS-232, CAN
- On-Board TEC Controller
- 5Vdc Input Power
- Completed by Heatsink
- Compact Size 85 mm ×60 mm ×21 mm
PLD-CW-2000(H)-ZIF
Constant current laser diode driver
- Unified design for 10/14 pin Butterfly Type I Laser Diode
- High Precision Constant Current Mode
- Output Current up to 2000 mA
- High Current Stability: 0.01 mA
- Control interfaces USB, RS-232, CAN
- LabView compatible
- Analog and Digital full current amplitude modulation
- Python labraries
- Optical power stabilization mode
- On-Board TEC Controller
- Regulated Maximum TEC Current
- High precision temperature stability: 0.01 deg
- 5 Vdc Input Power
- Completed by Heatsink
- Compact Size 100 mm ×85 mm ×31 mm
PLD-CW-1000-TII
constant current laser diode driver
- Unified design for 10/14 pin Butterfly Type II Laser Diode
- Constant Current mode
- Output Current up to 1000 mA
- Compliance voltage up to 3V
- Low current ripple
- High current stability
- USB, RS-232, CAN, UART interfaces
- LabView compatible
- Python libraries
- Analog RF Modulation
- Optical power stabilization mode
- On-Board TEC Controller
- 5VDC Input Power
- Completed by Heatsink
- Compact Size 85 mm ×60 mm ×21 mm
PLD-NS-GSS
gain switch suppressed short pulse diode driver
- Special Design for 10/14 pin Butterfly Laser Diode
- Output Current up to 2000 mA
- Compliance voltage up to 3V
- Adjustable pulse width 2–100 ns
- Repetition rate up to 1 MHz
- External trigger option
- Gain switch suppress option
- USB, CAN interfaces
- On-Board TEC Controller
- 5VDC Input Power
- Completed by Heatsink
- Compact Size 85 mm ×60 mm ×21 mm
PLD-NS-GSS-Tr
pre-shaping short pulse laser diode driver
- Special Design for 10/14 pin Butterfly Laser Diode
- Output Current up to 2000 mA
- Compliance voltage up to 3V
- Adjustable pulse width 10–500 ns
- Repetition rate up to 1 MHz
- External trigger option
- Gain switch suppress option
- Pulse pre-shaping option
- USB, CAN interfaces
- On-Board TEC Controller
- 5VDC Input Power
- Completed by Heatsink
- Compact Size 85 mm ×60 mm ×21 mm
HPLD-1000
high power constant current laser driver
- Wide input voltage range up to 48 Vdc
- Output current up to 25 A
- Compliance voltage up to 40 V
- Efficiency up to 97 %
- Low current ripple
- Triggering up to 3 kHz
- Analog modulation up to 30 kHz
- Overcurrent protection
- Reverse current protection
- Crowbar circuit protection
- External interlock function
- CAN interface
- Integrated heatsink
- Compact Size 70 mm ×56 mm ×34 mm
6 GSPS data rate arbitrary waveform generation kit for Laser Diodes
- To generate user defined waveform with discretization step of 166 ps by two channel FPGA based signal generation board
- To amplify the waveform in a RF amplifer to achieve RF output power up to 1W for high contrast modulation of LD
To apply the amplified signal to a conventional 14 pin butterfly LD package along with the bias and TEC controller in a compact LD transmission module
Other products
UKKO LASERS
Picosecond/ nanosecond fiber lasers
- Up to 70 W at 1064 nm
- Up to 30 W at 532 nm
- Up to 12 W at 355 nm
- 50 kHz–20 MHz repetition rate
- Up to 60μJ pulse energy
- Pulse duration 50 ps
- Excellent beam quality M²<1.3
- Monolithic, sealed and rugged design
- Air and water cooled options
- Low life-time ownership cost
EPFL-1550-1
1550 picosecond laser
Key features
- Up to 2W at 1550nm
- 35–500 ps pulse duration
- Up to 10 kW peak power
- Excellent beam quality M²<1.1
- Monolithic, sealed and rugged design
- Low life-time ownership cost
Applications
- LiDAR
- 3D Scanning
- Range Finding
- Metrology and Pollution Detection
- Other Scientific Research
SPGM series
Short pulse fiber amplifiers
Key features
- High-power gain module based on tapered double clad fiber
- Single mode output, M²<1.3
- Can operate with seed power as low as 10mW
- Gain as high as 40dB
- Out-of-fiber peak power as high as 1.5MW
- Large mode area, low level of nonlinear effects
- Ideal for amplification of narrow line width signals
- Slim and rigid metal housing
- Ready to splice to pump and seed source
- Easy thermal management
- Thermistors for temperature monitoring
ESF-1550 LASER
Single-frequency narrowband erbium laser
Applications
- Interferometric measurements
- Measurements of surface velocity in fast-moving, shock-wave processes
- Vibrometry
- Laser spectroscopy
- Optical communications
LDM LASER DIODE MODULES
Shortpulse diode lasers
- Laser pulses as short as 30 ps and widely tunable in nanosecond range
- Peak power of more than 2 W for specific wavelengths
- Standard range of wavelengths covering the most popular spectral range
- Collimated free space output with detachable fiber pigtail or fixed fiber output
- Adjustable pulse duration for ns modules 1–100 ns
- External TTL trigger capability
- Repetition rate up to 30 MHz from on-board generator and up to 60 MHz from an external source of TTL signal
- Wavelength TEC tuning
- Compact size, cost-effective design: 105 mm ×70 mm ×25 mm
- Computer control via mini USB interface
LaserBench
Precision constant current laser control bench
- Unified design for 10/14 pin Butterfly Laser Diode
- High Precision Constant Current Mode
- Output Current up to 2000mA
- High Current Stability: 0.01mA
- Control interfaces USB, RS-232
- Optical power stabilization mode
- On-Board TEC Controller
- Regulated Maximum TEC Current
- High precision temperature stability: 0.01deg
- 12Vdc Input Power
LASER BENCH QP
Laser diode controller
- QM14DIL external mount for 14-pin DIL laser diode connection
- QM14BTF external mount for 14-pin butterfly laser diode connection
- Output Current up to 2000 mA
- On-Board TEC Controller
- Regulated Maximum TEC Current