| Parameter | 532 nm | 1064 nm |
|---|---|---|
| Main specifications | ||
| Wavelength | 532 ± 0.5 nm | 1064 ± 0.5 nm |
| Max output power | >1 W | >3.0 W |
| Max repetition rate | 3 MHz | |
| Min repetition rate | 50 kHz | |
| Repetition rate step | 1 kHz – 1 MHz: 1 kHz 1 MHz – 3 MHz: 0,1 MHz |
|
| Max pulse energy | >10 uJ | >20 uJ |
| Pulse duration | Tunable 1 – 5 ns | |
| Polarization extinction ratio (PER) | >20 dB | |
| M2, max | 1,2 | |
| M2, min | 1,1 | |
| Output | Free space output, divergency 3,8 mrad Fiber length laser-SHG module: 300 mm Beam diameter: 0,3 mm at the output, waist diameter 0,18 mm |
Fiber length (L) 300 mm Fiber type: 10/125 DCF Output type: FC/APC, collimator or bare fiber |
| Monitoring fiber output | Optional monitoring fiber with FC/APC connector | |
| Operating requirements | ||
| Operating voltage | 24 VDC | |
| Maximal power consumption | 25 W | |
| Control interface | Connectors: SDF-V15-113L — laser control SDF-V09-213L — SHG control on laser head Hirose HR 10G-10R-10P(73) – SHG control |
|
| Operating temperature defined as heatsink temperature | +5 – +35 °C, heat sink should be attached to the base plane A (figure 1). The base plane is not connected to power ground. | |
| Operation rel. humidity (non condensing) | 0 … 85 % | |
| Storage temperature | -20 – +70 °C | |
| Mechanical specification | ||
| Dimensions | cylinder (D) 127 mm, height (H) 50 mm hermetically sealed housing |
|
| SHG dimensions | 110 x 50 x 40 mm (max), not hermetically sealed Heat dissipation surface should be attached to the base plane B (figure 2). The base plane is not connected to power ground. |
|
| Min bend radius of output fiber | 60 mm | |